My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 47

Set Descending Direction
per page
Page
  1. pacer s pump electric frp

    Pacer Pumps

    Centrifugal Pump

    SE2HL-D3.0C
    15% Off Special Price $1,009.80 Regular Price $1,188.00

    Pacer S pump 58-12H4 D3.0C close coupled to a TEFC 3hp motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlori...

    3HP 230/460v EPDM Learn More
    Add to Wish List Add to Compare
  2. pacer s pump electric frp

    Pacer Pumps

    Centrifugal Pump

    SE2IL-D5.0C
    $1,280.00

    Pacer S pump close coupled to a TEFC 5hp motor.

    Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride, salt brin...

    5HP 230/460v Learn More
    Add to Wish List Add to Compare
  3. calpeda ct61 pump

    Calpeda Pumps

    Coolant water pump

    CT61 03H36S
    $307.00

    Calpeda Pump: Turbine pump for clean liquids, Clear water pump, without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. Heavy duty Peripheral pump. Works with high pressure soaker drip hoses irrigation, d...

    1/3HP 1" 230/460 Learn More
    Add to Wish List Add to Compare
  4. pacer s pump electric frp

    Pacer Pumps

    Centrifugal Pump

    SE2HB-D3.0C
    $1,064.00

    Pacer S pump 58-12H4 D3.0C close coupled to a TEFC 3hp motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlori...

    3HP 230/460v Learn More
    Add to Wish List Add to Compare
  5. calpeda NM2A electric pump

    Pedrollo Pumps

    Centrifugal End Suction pump

    NM2A-07H36S
    $609.00

    Calpeda centrifugal pump for clean water . BOOSTER PUMP.They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN...

    3/4HP 230/460v Learn More
    Add to Wish List Add to Compare
  6. MP 26535 Series 80 w/ motor

    MP Pumps

    Series 80 w/ motor

    26535
    $1,710.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3-phase, 230/460 V, 3450 RPM. Pumps are right hand rotation with bronze enclosed impeller.
    Learn More
    Add to Wish List Add to Compare
  7. MP 26544 Series 110 w/ motor

    MP Pumps

    Series 110 w/ motor

    26544
    $1,480.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-.75 HP, 3450 RPM.
    Learn More
    Add to Wish List Add to Compare
  8. MP 24580 Series 110 w/ motor

    MP Pumps

    Series 110 w/ motor

    24580
    $1,450.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3450 RPM.
    Learn More
    Add to Wish List Add to Compare
  9. 75HHT TEFC CI SP pump 7.5HP

    Griswold Pumps

    CI SP pump 7.5HP

    75HHT TEFC
    $7,726.00
    Cast Iron Self Priming Griswold pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    7-1/2HP 230/460v TEFC Learn More
    Add to Wish List Add to Compare
  10. 10HHT TEFC Irrigation pump

    Griswold Pumps

    Irrigation pump

    10HHT TEFC
    $8,328.00
    Irrigation pump is a heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. These irrigation pumps are self priming.
    10HP 230/460v TEFC 4" Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 47

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Water Pumps Remove This Item
  2. Voltage (Range) 220-240/460-480 Remove This Item
  3. Motor TEFC Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Three (3) 46 items
Horse Power (HP)
  1. 1/3 2 items
  2. 1/2 1 item
  3. 3/4 9 items
  4. 1 1/2 3 items
  5. 2 7 items
  6. 3 6 items
  7. 5 7 items
  8. 7 1/2 6 items
  9. 10 3 items
  10. 15 1 item
  11. 20 2 items
inlet size
  1. Less than 1" 1 item
  2. 1" 4 items
  3. 1 ¼" 2 items
  4. 1 ½" 5 items
  5. 2" 11 items
  6. 3" 4 items
  7. 4" 4 items
PRICE $
$  -  $