Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Explosion Proof 316SS Self prime pump
39301
$2,270.00Explosion proof motor, 316SS Self Prime Pump for chemicals, or many other liquids where corrosion is a problem by MP. Marine Boat air conditioning is a big market for these pumps. Model FMX75 is a high performance self-priming 316 stainless steel ...
115v Exp Learn More -
AMT Pumps
Explosion Proof Electric Trash pump 5HP
393A-X5
$3,526.005HP Electric trash pump. AMT Cast Iron Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainles...
230/460v 3P 2" Explosion proof Learn More