Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Centrifugal Pump
4242-95
20% Off Special Price $2,525.60 Regular Price $3,157.00High Pressure pump. AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self-cleaning ability ...230v 7.5HP TEFC Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CPH50C16S High Head
$2,570.57High pressure centrifugal water pump with electric motor. Good for wash down, irrigation, booster, chiller. Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive ...5HP 230v/1 Learn More -
AMT Pumps
Irrigation pump AMT 5HP
3657-95
20% Off Special Price $2,221.60 Regular Price $2,777.00Irrigation Pump 5HP
Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valv...
5HP 230v/1 TEFC Learn More -
Pacer Pumps
SE2HL C5.0C
58-12H4-C5.0C
$1,870.00S pump close coupled to a TEFC 5 HP 230V electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride...5HP 230v/1 Learn More -
EBARA Pumps
SS Pump 5 HP TEFC
A3U-32-160A50T1C
$3,582.73Stainless Steel Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-lasting ind...5HP 230V TEFC Learn More