Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B75980
Berkley centrifugal pump, End suction centrifugal pump, close coupled with mechanical seal and Flanged connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications. 125# flat face flanges.BERKELEY Close...
10HP 3 phase ODP Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54606
10HP End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains, spa, pools, commercial dishwashers lvo and other water transfer applications.230/460 10HP Learn More -
Berkeley Pumps
Centrifugal Water Pump
B58088
End suction centrifugal pump, close coupled with mechanical seal.10HP 230/460V ODP Learn More -
Berkeley Pumps
B1-1/2ZPL (10HP - Three Phase - CI)
B53752
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All centrifugal pumps offer back pull-out design
- Impeller size is trimmed
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
10HP 230/460V ODP PACKING Learn More -
Berkeley Pumps
B4ZPKS Centrifugal Self-Priming Pump
B54636
Berkeley Type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and i...
10HP 230/460v Learn More -
Griswold Pumps
High Pressure pump CI SP 10HP
10HLT ODP
$8,014.90High Pressure pumps. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. High pressure pumps are used for irrigation, sprinkler, spraying and fire protection.10HP 230/460v Learn More -
Griswold Pumps
Irrigation pump
10HHT
$8,328.00Griswold H Series Irrigation Self-Priming Pumps
Irrigation Pump. High pressure irrigation pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
H Series pumps are a un...
10HP 230/460v ODP Learn More