Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
Electric Self-Priming Pump
B60769
The type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and irriga...
15HP 230/460v 3" Learn More -
Griswold Pumps
CI SP pump 15HP
15HHT TEFC
$9,424.00Self-priming high flow & high-head pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
15HP 230/460v Learn More -
Griswold Pumps
Irrigation Pump
15JMT
$6,342.50Irrigation pump. Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily b... -
Berkeley Pumps
B1-1/2ZPL (15HP - Three Phase - CI)
B53753
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v PACKING Learn More -
Berkeley Pumps
B1-1/2ZPH (15HP - Three Phase - CI)
B53759
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v packed Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54118
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.15HP 230/460v/3 ODP Learn More -
Berkeley Pumps
B1-1/2ZPLS
B54504
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More -
Berkeley Pumps
B3ZPM (15HP - Three Phase - CI)
B51711
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 9"
- Berkeley Pump discharge size: 3"
- Berkeley Pump suction size: 4"
15hp 230/460v packing Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 15HP/3ph
B74766
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool and other water transfer applictions.15HP 3600/60/3 230/460V Learn More -
Griswold Pumps
Irrigation pump
15HHT ODP
$9,424.00Irrigation pump, Self-priming high flow & high head high pressure pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free high pressure irrigation pump serv...
15HP 230/460v ODP Learn More