Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 1/2HP
JMC3-56
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
Three Phase Booster Pump
HP7C3-02
This Three Phase Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrauli...230/460v Learn More -
Hypro Pumps
Bronze centrifugal Pump
COMBB223
$1,226.06Bronze pump by Shurflo, centrifugal pump. Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Mechanical sealed.
This seri...
1/2HP 230/460v/3 Learn More -
Hypro Pumps
High Head Pump Cast Iron
CHMCV123
$605.22High Head Pump and motor. Cast Iron High Head Centrifugal Pumps.Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, car wash, general transfer, filtration, cooling towers, condensate ret...
1/2HP 230/460v ODP Learn More -
Sta-Rite
J Centrifugal Pump High Head 1/2HP
JHC3-61H
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
-
Sta-Rite
JB Centrifugal Pump High Head 1/2HP
JBHC3-61S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
