Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 3/4HP
JMD-57L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
115/230 Learn More -
Sta-Rite
JB Centrifugal Pump High Head 3/4HP
JBHD-62S
Sta-Rite - JBHD: JB Centrifugal Pump High Head 3/4HP brass impeller. This pump has a heavy-duty cast iron construction with silicon bronze impeller. Replace Myers CT07B- Applications: Water systems and sprinkling for homes, farms and industry ...
3/4HP 115/230v Brass impeller Learn More -
Sta-Rite
Booster Pump Multi Stage
HP7D-02
This Multi Stage Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...115/230v Learn More -
Sta-Rite
Booster Pump
HPS7D-01
This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components... -
Sta-Rite
J Centrifugal Pump High Head 3/4HP
JHD-62HL
Sta-Rite - JHD: J Centrifugal Pump High Head 3/4HP. This pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT07- Applications: Water systems and sprinkler booster for homes, farms and industry
- Drain Port: Provide...
3/4HP 115/230v Learn More -
Hypro Pumps
Bronze Brass centrifugal Pump
COMBB33
$1,199.00Hypro Shurflo Bronze Brass pump, centrifugal pump. Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation, chemical processing, marine, liquid transfer and cooling. Mechanical se...
3/4HP ODP 115/230v Learn More -
Sta-Rite
Booster Pump 3/4HP
HP7D3-02
This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components...230/460 3/4hp Learn More -
Sta-Rite
Booster Pump
HPS10D-01
This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components... -
Flotec Pumps
Corrosion Resistant Convertible Jet pumps
FP4322
$402.96Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping...
3/4 HP Learn More -
Flotec Pumps
Cast Iron Convertible Jet pumps
FP4222
$390.70Cast Iron convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping levels to 25'...
3/4 HP Learn More
