Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
Srpinkler Pump Pro Storm Series of cast iron sprinklers offer
superior unmatched performance, available in 1 HP through 2 1/2 HP
models. The Pro Storm offers
“single-body-fill” priming to 25-foot
lifts, in less than 5 minutes! The Pro Storm mo...
Sprinkler pump 1hp PDH. Quick priming PD Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump co...
The Pro Storm Series of cast iron sprinklers offer superior
unmatched performance, available in 1 HP through 2 1/2 HP models.
The Pro Storm offers “single-body-fill”
priming to 25-foot lifts, in less than 5 minutes! The Pro Storm
models exceed...