My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 38

Set Descending Direction
per page
Page
  1. MP Pumps

    2CT Pedestal Trash Pump

    44170

    $3,762.50

    2CT-3 Jaeger Trash Pumps, self-priming, cast iron. For Close-coupled to a 182/4TC frame electric motor.

    The Model 2CT is a 3" x 3" Self Priming Trash Pump which is close coupled. This unit has cast iron construction with a ductile iron impeller, ...

    PTO 3":for electric motor Learn More
  2. MP Pumps

    FloMax 10 Pump w/ Motor

    22779

    $6,950.00
    Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP
    7.5HP 230 1phase Learn More
  3. MP Pumps

    316SS Self Priming Pump Honda

    38577

    $6,112.50

    316SS self priming pump powered by Honda gas engine.

    Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda, recoil start. 316SS gas semi-trash pumps. 

    Standard features include ...

    5HP Honda Stainless Learn More
  4. MP Pumps

    FM30 Pump w/ 18HP Engine

    38548

    $10,662.50

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, HDD, pilings, bilge, ballast transfer and other large water transfer or construction ap...

  5. MP Pumps

    FM30 Pump Electric motor

    34838

    $9,700.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Close coupled Electric motor. Used for irrigation, water transfer.
    20HP 230/460v Learn More
  6. MP Pumps

    FM 15 230v

    38481

    $5,137.50

    Flomax 15 230v/1 are self-priming pumps, pipe size 3" NPT. Single Phase Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP

    Anyone who has ever owned or maintained a pool will tell you that every pool needs a good filte...

    7.5HP 230v/1 TEFC Learn More
  7. MP Pumps

    Series 80 w/ motor

    35637

    $2,813.75
    MP Series 80 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 3 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...
    3HP 230/460v Exp Learn More
  8. MP Pumps

    FM5 Pump end only

    26082

    $3,925.00
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard 56C motor. NOT For use with gas engine. Bronze
  9. MP Pumps

    FM5 Bronze pump

    26646

    $4,612.50
    Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...
    1.5HP 230/460v Learn More
  10. MP Pumps

    FM30 Pump w/ no engine

    33212

    $4,337.50
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.
    6.75" impeller Learn More
View as List Grid

Items 1-10 of 38

Set Descending Direction
per page
Page