Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Flomax 8 Pedestal pump
21339
$1,020.00Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. CI pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation.Pedestal mounted CI 5" imp. Learn More -
MP Pumps
Flomax 8 Pedestal pump
21336
$1,540.00Aluminum Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. Aluminum pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation. 21330 is another version.The FLOMAXï½® series of pumps are commonly used in...
Aluminum Pedestal mnt Learn More -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
Pacer Pumps
Plastic Corrosion Resistant pump PCE2CL-D2.0C
60-12C4-D2.0C
$987.00Plastic Corrosion Resistant Pump 2HP.
PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resist...
230/460v/3 2 HP Learn More -
MP Pumps
FM 8 w/ Engine
29635
$2,010.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda5HP Honda Learn More -
MP Pumps
FM 15 Bronze Pump End Only
21371
$6,410.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump end only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. See fl... -
MP Pumps
FM 8 Hydraulic Motor
35272
$1,518.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Hydraulic Motor Driven Pump using a pedestal Coupled Cast Iron Hydraulic Motor. Hydraulic motor .37cu in displacement.MP Flomax 2" Hydraulic Pump Learn More -
Pacer Pumps
SE2FBL HYC Hydraulic pump
58-12F3 HYC
$925.60Pump S with HYDRAULIC MOTOR.
Great pump for removing water from bilge or anywhere a large volume of water needs to be removed and spraying water from tankers. Also good for irrigation, water truck, fish farms ect. Structural plastic FRP is light ...
Hydraulic Drive 2" Learn More -
MP Pumps
FlowMax 10 Hydraulic motor
30865
$3,080.00Flomax 10 are self-priming pumps, pipe size 2" NPT. Hydraulic Motor Driven Pump using pedestal mounted pump and motor. FM10PMP. Dowty ultra hydraulic motor. -
Pacer Pumps
SE2IL CSS Pedestal Mounted
58-12I4 P
$473.00Plastic self priming pump, Pedestal Mounted or frame mounted for long coupling or belt drive. Pacer Centrifugal Horizontal Mechanical Sealed Pump. Pacer series with CAST IRON BEARING PEDESTAL for long coupling or belt drive. Great pump for de-ic...2" PE Pedestal Learn More