Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Engine Driven Hi-Pressure Pump
4787-95
$1,162.00Self-priming high Pressure pump for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply & pressure boosting. 2 stage, cast iron diffusers & stainless steel closed impellers for high efficiency. Includes heavy-...
B&S CP650 2STG 1-1/2" Learn More -
Darley Pumps
Porpoise Floating Fire Pump
2BEF-BS
$4,440.50Porpoise floating pump gives you the flexibility of high volume and moderate pressure never before available in a floating pump. Porpose Float Pump for streams, ponds, swimming pools, and hard-to-reach sources of water. Requires only 6” of water. ...
13HP Briggs Learn More