Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B3ZRM Water Truck Pump B3ZR Hydraulic
B59538
Berkeley B3ZRM CCW rotation (opposite of picture) Type B frame-mount pumps are designed for the user who has a separate hydraulic power source suitable for driving the pump mounted hydraulic motor (customer supplied). One-piece motor mount casting...
Hydraulic CCW Packing NPT Learn More -
Berkeley Pumps
Water Truck Pump B3ZRM
B66168
Water Truck Pump B3ZRM, flusher truck
Berkeley B3ZRM Type B frame-mount pumps are designed for the user who has a separate power source suitable for driving through couplings, hydraulic or with belts. Ideal for general purpose applications requir...
CALL FOR LOWEST $$$ Packing CCW NPT STD Learn More