Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Calpeda Pumps
Coolant water pump
CT61 03H36S
$307.00Calpeda Pump: Turbine pump for clean liquids, Clear water pump, without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. Heavy duty Peripheral pump. Works with high pressure soaker drip hoses irrigation, d...
1/3HP 1" 230/460 Learn More -
Pedrollo Pumps
Turbine pump
PQ03H36S
$528.39Turbine Pump, Peripheral pump, clear water pump. OBSOLETE Here is the alternative.
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made...
230/460v 1/3HP CI/Br Learn More