Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM 15 w/ motor
22728
$4,080.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP
Anyone who has ever owned or maintained a pool will tell you that every pool needs a good filter system to keep it ...
7.5HP 230/460v TEFC Learn More -
MP Pumps
FM 15 w/ motor
26557
$3,850.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP, 3ph Learn More -
MP Pumps
FM 15 w/ motor
22784
$4,930.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Long-Coupled Cast Iron Electric Motor-10 HP.Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-o...Cast Iron 10Hp, 3phase Learn More -
MP Pumps
Series 60 w/ motor
27675
$1,700.00MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...1HP 230/460v TEFC Learn More -
MP Pumps
Series 30 w/ motor
22741
$1,390.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
24481
$1,160.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
25457
$1,320.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
MP Centrifugal pump
22731
$1,020.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
American made cast iron transfer p...
3/4HP 230/460v TEFC Learn More -
MP Pumps
Series 30 w/ motor
22839
$1,030.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
American Stainless
SS pump & motor
C14616BEX3
$1,613.36304SS centrifugal pump. SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. ...1 1/2HP 230/460V EXP Learn More