Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 30 w/ motor
22741
$1,390.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
24481
$1,160.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
FM5 Pump w/ Motor
26301-1726
$1,561.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-.5 HP -
American Stainless
SS horizontal pump with 1/2 hp motor.
S14317BBD3
$597.40Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...1/2HP 230/460V ODP Learn More -
American Stainless
SS pump & motor
C150124BD3
$738.99Model SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not h...1/2HP 230/460V ODP Learn More -
American Stainless
SS pump & motor 1725RPM
C15730BBDC
$638.45SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have ...1/2HP 230/460V ODP Learn More -
American Stainless
SS pump & motor 1725RPM
C15730BBTC
$687.01SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not have a ...1/2HP 230/460V TEFC Learn More -
American Stainless
Stainless Steel pump
C14311BBD3
$602.64Stainless Steel pump has a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the centrifugal pump case when mounted vertically. The...1/2HP 230/460V ODP Learn More