My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 619

Set Descending Direction
per page
  1. AMT Pumps

    1-1/2" Self Prime Centrifugal pump Stainless

    3894-98

    25% Off Special Price $1,570.50 Regular Price $2,094.00
    AMT Self-Priming Stainless Steel Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/fumigants. All models are equipped with TEFC (Totally Enclo...
    230/460v 2HP Learn More
  2. AMT Pumps

    1-1/2" Self Prime Exp pump Stainless

    3894-X8

    $3,299.87

    AMT Self-Priming EXPlosion Proof SS Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping solvents. Hazardous Duty TEFC (Totally Enclosed Fan Cooled) EXPLOSION PROOF motors....

    230/460v 2HP EXP Learn More
  3. Gorman-Rupp Pumps

    Honda GX160 High Pressure water pump

    2P5XHR

    15% Off Special Price $1,491.75 Regular Price $1,755.00

    Honda High Pressure water pump by Gorman-Rupp AMT IPT 2P5XHR. 

    High Head Pump, Die-cast Aluminum construction powered by a Honda GX160 commercial grade engine. Made in America.

    Self-Priming Engine Driven Pump

    With the GX Honda gas engine poweri...

    Honda GX160 2" Learn More
  4. AMT Pumps

    Sewage Trash pump 7.5HP

    394G-95

    25% Off Special Price $2,352.75 Regular Price $3,137.00

    Sewage Trash Pump, 7.5HP electric

    Self priming electric motor driven pumps for all sorts of medium sized debris. Factory sumps, Loading docks, wastewater pits, manure pits and high volume water transfer. Rugged American made pump. Motors are avai...

    230/460v 3P 20,400GPH, 3" 394A Learn More
  5. MP Pumps

    FM30 Pump w/ no engine

    33212

    $3,470.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.
    6.75" impeller Learn More
  6. MP Pumps

    FM30 Pump w/ 18HP Engine

    39143

    $8,280.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

  7. MP Pumps

    2CT-3HS Trash Pump PEO

    43928

    $2,880.00

    2CT Jaeger Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled 184TC motor 3450rpm. This unit has cast iron constru...

    For electric Learn More
  8. MP Pumps

    2CT Trash Pump PEO

    43931

    $2,600.00
    2CT Jaeger MP Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled. This unit has cast iron construction with a du...

  9. MP Pumps

    FM40 Engine Mount Pump

    33354

    $8,300.00
    Flomax 40 are self-priming pumps, pipe size 4" NPT. PUMPAK for Engine Drive. Used for irrigation, ship fire protection, and other water pump applications requiring high pressure and high flow. ENGINE NOT INCLUDED, use 18-50 HP.
    For engine drive mount CI Learn More
  10. MP Pumps

    FM5 pump pak Engine mount

    21300

    $1,340.00
    Flomax Pumps 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard engines. For use with 3/4" crankshaft. PumpPack
    Pump kit, Aluminum Learn More
View as List Grid

Items 31-40 of 619

Set Descending Direction
per page