Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Solids Handling Explosion Proof Electric Pump
276D-X5
$2,755.00Solids Handling Explosion Proof Electric Pump Self-priming pump
is designed for Industrial and Commercial applications requiring high volume liquid transfer, hazardous duty and processing. These 2" pumps feature self-cleaning clog resistant impel...
2HP 230/460v EXP Learn More -
Gorman-Rupp Pumps
Explosion Proof Self Priming Pump
2D3-X2-3P
$4,695.00This line of Gorman-Rupp Explosion Proof, Self-priming 2D3-X2-3P Centrifugal pumps is designed for use in hazardous environments and/or for handling flammable liquids. 1-1/4", 1-1/2" and 2" NPT port sizes available with single and 3-phase motors 1...
230/460v/3 2HP Learn More