Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 30 w/ motor
22741
$1,390.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
24481
$1,160.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI. -
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
AMT Pumps
SS Self PrimingPump
429A-98-3ph
20% Off Special Price $868.80 Regular Price $1,086.00Self Priming AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use with nonfl...230-460V 3phase 1/2HP TEFC Learn More -
Pacer Pumps
SPRY1-1/2AV-G.5C
58-21A1-G.5
$780.00Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, POLY plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has ....5HP/1750 Learn More -
AMT Pumps
Hazardous Duty Pump
429A-X8
$1,756.00Hazardous Duty Explosion Proof motor AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommende...115/230v 1/2HP Explosion Proof Learn More -
AMT Pumps
Self Priming Centrifugal Pump
2852-95
25% Off Special Price $506.25 Regular Price $675.00Self-priming centrifugal pump 1/2HP
for circulating, pond, fountain, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. American made
See Curve "C"
1/2HP 115/230v ODP Learn More -
AMT Pumps
CI Centrifugal
2827-95
23% Off Special Price $602.91 Regular Price $783.00This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of...
115/230v 1/2HP ODP Learn More -
AMT Pumps
Self Priming Explosion Proof Centrifugal Pump
2852-X5
$1,995.25Self Priming Explosion Proof Pump. Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. EXP or Hazardous Duty electric motor. Built in flapper/check valve. Handle & ste...
1/2HP 115/230v CI 67GPM EXP Learn More