Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pacer Pumps
SE3LL C5.0C
58-13L4 C5.0C
15% Off Special Price $1,651.55 Regular Price $1,943.00S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. -
Pacer Pumps
SE2JL C5.0C
58-12J4 C5.0C
$1,591.00S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications.5812J4 C5.0C5812J4C5.0C58 12J4C5.0C -
MP Pumps
FM 8 w/ Motor
22845
$4,760.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor 5 HP 230/1phase5HP 230v/1 Cast Iron Learn More