Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pacer Pumps
SPRY2FLN D5.0C
58-22F88-D5.0C
$2,584.50S pump close coupled to a TEFC 3 HP 230V/460v electric motor. Self priming Polypro plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Non metalic internals. No wetted metal parts. Used often as a... -
Pacer Pumps
SPRY2HLN D5.0C PP
58-22H88-D5.0C
$1,932.00S pump close coupled to a TEFC 5 HP 230V/460v electric motor. Self priming Polypro plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Non metallic internals. No wetted metal parts. Used often as ...5HP 230/460v Learn More -
Pacer Pumps
SY2HVN D5.0C
58-32H99-D5.0C
$4,087.50S pump close coupled to a TEFC 5 HP 230V/460v electric motor. Self priming Ryton plastic resists good for many mild acids chemical and most water transfer applications. Non metallic internals. No wetted metal parts. Used often as a chemical sump ... -
MP Pumps
FM 15 w/ motor
24395
$3,440.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast Iron Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.5HP 230/460v CI Learn More -
MP Pumps
FM 15 Stainless Steel w/ motor
36609
$7,060.00Stainless Steel FM15. Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast SS pump, close coupled Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.
American Bureau of Shipping (ABS) a...
5HP 230/460v SS Learn More -
MP Pumps
FM 15 Stainless Steel w/ motor
37960
$8,530.00Flomax 15 Stainless Steel pumps are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast SS pump, close coupled Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.
American Bureau of Shipping (ABS) a...
5HP 230v/1 SS Learn More -
MP Pumps
FM 8 w/ Motor
22845
$4,760.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor 5 HP 230/1phase5HP 230v/1 Cast Iron Learn More