My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 49

Set Descending Direction
per page
Page
  1. AMT - 282C-X8: Explosion Proof SS self priming Pump

    AMT Pumps

    Explosion Proof SS Centrifugal Pump

    282C-X8
    $2,553.50

    Explosion Proof Motor Stainless Steel Self-priming Centrifugal pump is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant...

    115/230v 1HP EXP SS Learn More
    Add to Wish List Add to Compare
  2. 282K-95_14 AMT Pumps - 282C-95

    AMT Pumps

    CI Centrifugal

    282C-95
    23% Off Special Price $726.11 Regular Price $943.00

    This line of AMT Self-priming Solids Handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing.

    These pumps feature self-cleaning clog resistant impeller capab...

    115/230v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  3. AMT - 282C-X5: Explosion Proof self priming Pump pumpbiz

    AMT Pumps

    Explosion Proof CI Centrifugal Pump

    282C-X5
    $2,506.21

    Explosion Proof Motor - Self-priming Centrifugal pump is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capa...

    115/230v 1HP EXP CI Learn More
    Add to Wish List Add to Compare
  4. MP 27675 Series 60 w/ motor

    MP Pumps

    Series 60 w/ motor

    27675
    $1,700.00
    MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...
    1HP 230/460v TEFC Learn More
    Add to Wish List Add to Compare
  5. MP 27674 Series 60 w/ motor

    MP Pumps

    Series 60 w/ motor

    27674
    $1,750.00
    Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotatio...
    1HP 115/230v Learn More
    Add to Wish List Add to Compare
  6. MP 22839 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    22839
    $1,030.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  7. MP 25434 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    25434
    $690.80
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  8. Flotec 2825SS-01 Stainless Steel Sprinkler Utility Pump

    Flotec Pumps

    Stainless Steel Sprinkler Utility Pump

    2825SS-01
    $389.00
    Features:
    • Stainless Steel Pump Housing
    • Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
    • Permanently lubricated Bearings mean no maintenance problems
    • Completely portable; pump mounted on stand with handle
    • Factory installed 6' power cord wit...
    Simer sprinkler pump Learn More
    Add to Wish List Add to Compare
  9. MP_Flomax8 pump with motor

    MP Pumps

    FM 8 w/ Motor 1725

    33466
    $1,310.00
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP
    1HP 230/460v 1725RPM CI Learn More
    Add to Wish List Add to Compare
  10. 1G1XH_1.jpg

    AMT Pumps

    1 inch Utility Gas Water Pump

    1G1XH
    20% Off Special Price $559.20 Regular Price $699.00

    1 inch Utility Gas Water Pump

    Portable water pump has Honda GX25 4HP 4-Cycle engine. Cast Aluminum Utility pump 3600GPH for use in construction, irrigation, fire fighting, wash down, general dewatering, & herbicides. Includes built in check valve...

    Portable water pump -Honda engine - Made in USA Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 49

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Self Priming Pumps Remove This Item
  2. Horse Power (HP) 1 Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 32 items
  2. Three (3) 12 items
Voltage (Range)
  1. 110-120 2 items
  2. 220-240/460-480 9 items
  3. 110-120/220-240 31 items
  4. 208-240/460 3 items
  5. 12/24/36 VDC 1 item
inlet size
  1. 1" 9 items
  2. 1 ¼" 14 items
  3. 1 ½" 16 items
  4. 2" 4 items
PRICE $
$  -  $
Motor
  1. EXP (C 1, Gp C/D & C11, Gp F/G) 4 items
  2. EXP (C 1, Gp C/D) 2 items
  3. Gas Engine 3 items
  4. ODP 16 items
  5. TEFC 20 items
  6. TENV 1 item