My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

7 Items

Set Descending Direction
per page
  1. AMT Pumps

    1 inch Utility Gas Water Pump

    1G1XH

    $742.69

    1 inch Utility Gas Water Pump

    Portable water pump has Honda GX25 4HP 4-Cycle engine. Cast Aluminum Utility pump 3600GPH for use in construction, irrigation, fire fighting, wash down, general dewatering, & herbicides. Includes built in check valve...

    Portable water pump -Honda engine - Made in USA Learn More
  2. AMT Pumps

    Self Priming 12V dc Pump

    12SP10C-12V

    $1,632.00

    12VDC Self-priming Solids Handling pump

    for circulating, liquid transfer and dewatering applications. Battery powered AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer,...

    1HP 12VDC Battery Learn More
  3. AMT Pumps

    Self Priming Centrifugal Pump

    12SP10C-1P

    $1,003.00

    Self-priming centrifugal pump, all Cast Iron CI construction

    for circulating, liquid transfer and dewatering applications. Solids handling 1HP AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring hig...

    1HP single phase Learn More
  4. AMT Pumps

    12VDC Self Priming Centrifugal Pump

    285G-95-DC

    $1,935.88

    12 Volt DC Self-priming pump

    285F-95-DC 3/4HP for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. 12vdc water & chemical pumps are often used on ...

    3/4HP 12V DC Learn More
  5. AMT Pumps

    Self Priming Centrifugal Pump 1HP

    285J-95

    $920.13

    1 HP Self-priming cast iron pump for clean or dirty water circulating, liquid transfer, coolant and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. For a 12v model see -12 version...

    1HP 230/460v/3 TEFC Learn More
  6. AMT Pumps

    Self Priming Centrifugal Pump 12vdc

    285J-95-12

    $1,423.75
    12 Volt DC (12vdc) powered Self-priming centrifugal pump for circulating, mobile liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller semi-trash pump. Built in flapper / check valve. Handle & steel case. 12v DC mo...
    1HP 12 Volt DC Learn More
  7. Wayne

    1 HP Portable Lawn Sprinkler / Utility Pump

    PLS100

    $469.51
    This pump is designed to sprinkle lawns and small gardens from lakes, ponds, or rivers, empty or fill stock tanks, remove standing water from flooded areas and transfer water.

    * 304 Stainless Steel pump housing / plastic impeller for durabilit...

    115v 1HP 720 Gallons Per Hour Learn More
View as List Grid

7 Items

Set Descending Direction
per page