My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 281-290 of 338

Set Descending Direction
per page
  1. Sta-Rite

    Booster Pump

    HP20G3-02

    $3,141.00
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...
  2. Sta-Rite

    Booster Pump SS

    HPS10F3-01

    $3,596.00
    This Booster Pump is the most durable booster pump available. SS Pump Body. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...
  3. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-20MT

    $12,370.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  4. Sta-Rite

    Booster Pump SS

    HPS10G3-01

    $4,315.00
    This Booster Pump is the most durable booster pump available. SS Pump Body. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...
    230/460v 2hp Learn More
  5. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-15MT

    $11,620.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  6. Sta-Rite

    Water Booster Pump

    HP30E3-02

    $2,355.00
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components...
  7. Sta-Rite

    Water Booster Pump

    HPS30E3-01

    $3,169.00
    Stainless Steel Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraul...
    230/460v 1hp Learn More
  8. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-20M

    $10,420.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    20HP Learn More
  9. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-15MT

    $11,620.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  10. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-10MT

    $10,880.00

    High pressure centrifugal Pump.

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ...
View as List Grid

Items 281-290 of 338

Set Descending Direction
per page