Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
EBARA Pumps
Stainless Steel Jet Pump
JEU150620T3C
$1,634.15EBARA Pro Steel JEU Jet Pump series is designed for dependable performance and rugged continuous duty service. When duty requirements demand material conformance for corrosion resistance, Pro Steel is the choice. This versatile and reliable pum...2HP 208-230/460V TEFC Learn More -
EBARA Pumps
SS Pump 10 HP
A3U-32-200-1100T3C
$4,007.52The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for ...
10HP 208-230/460V TEFC Learn More -
MP Pumps
CHEMFLO 1
31114
$2,080.00Chemflo 1 -316 stainless pump and motor. Trimmed 3.6" diameter impeller.
CF1 Features:
- Investment-Cast, 316 Stainless Steel is Stronger than Stamped/Formed 304
- Standard Front Facing
- Standard Type 2100 Mechanical Seal
- Optional Teflon Type 9 ...
230/460v/3 1-1/2HP Learn More -
MP Pumps
CHEMFLO 1 w/ motor
30885
$1,940.00Chemflo 1 CF1 Stainless Steel electric pump.Features:
- Investment-Cast, 316 Stainless Steel is Stronger than Stamped/Formed 304
- Standard Type 2100 Mechanical Seal
- Optional Type 9 and Hard Face Mechanical Seals
- Exotic Elastomers and Seal...
3HP 230/460v/3 Learn More -
MP Pumps
CHEMFLO 8 5HP 1725
33211-333
$3,708.00Horizontal 316 Stn. Stl. close coupled to a 3 HP 1725 RPM 3 phase motor. -
MTH Pumps
Turbine Pump 1.5HP
T51EAB153TB
$2,787.65Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
MTH Pumps
Turbine Pump 1.5HP
T51EBF153TB
$2,426.28Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
MTH Pumps
Turbine Pump 1/2HP
T51BAB053TB
$1,721.31Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...