My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 69

Set Descending Direction
per page
Page
  1. MP Pumps

    316SS pump

    35666

    $827.50

    CFX 75---3/4" x 3/4" End Suction Centrifugal Pump 316SS Pump for chemicals, salt water or many other liquids where corrosion is a problem.

    Not self priming

    Marine Boat air conditioning is a big market for these pumps along with heavy equipment. ...

    115v 1/6HP 3/4" Learn More
  2. MP Pumps

    316SS Self prime pump FMX100

    39467

    $1,650.00

    The patented ; FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A carbon / ceramic / FKM mechanical seal is standard. With a maximum flow of over 55 GPM and pr...

    230v/460v 3/4HP TENV Learn More
  3. MP Pumps

    CHEMFLO 2 w/ motor

    31321

    $3,350.00

    Chemflo pump 2HP CF2 cmf2, Stainless steel pump and TEFC motor for many chemicals, cleaning solutions and other harsh industrial applications. Made in the USA

    Features:

    • Investment-Cast, 316 Stainless Steel is Stronger than Stamped/Formed 304
    • ...
    2HP 230/460v Learn More
  4. MP Pumps

    316SS Self prime pump gas engine

    39759

    $2,050.00

    316SS Self prime pump gas engine. 3HP 4-cycle with recoil start.

    The patented ; FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A carbon / ceramic / FKM mech...

    3HP Gas Engine Learn More
  5. MP Pumps

    FMX100 Centrifugal Pump

    39529

    $1,913.75
    Model FMX 100 is a high performance 316SS centrifugal pump. The self priming pump is ideal for marine, agricultural, FloWash rinse / wash ware, commercial or industrial chemical transfer applications of compatible fluids.The FMX100 model featu...
    3/4HP 115/230v Learn More
  6. MP Pumps

    Petroleum 10

    38349

    $5,437.50

    Petroleum 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynam...

    Ductile Iron Hydraulic 2" Learn More
  7. MP Pumps

    316SS Self prime pump FMX75

    35329

    $1,131.25

    316SS Self Prime Pump for chemicals, salt water or many other liquids where corrosion is a problem by MP. Marine Boat air conditioning is a big market for these pumps. Model FMX75 is a high performance self-priming 316 stainless steel centrifugal ...

    230v/1 TEFC Learn More
  8. MP Pumps

    High Head Pedestal Bronze pump

    36623

    $13,826.29
    High Head Pedestal Bronze pump.

    Self priming high pressure centrifugal pump, pedestal mounted for pulley or belt drive on ship or boat.

    • 2 x 2" HIGH HEAD
    • ABS type approved for many shipboard services
    • FLOWS - TO 160 GPM
    • PRESSURES - TO 190 TD...
    10HP-3ph PED 6.5 Imp. HR"W/BASE" Learn More
  9. MP Pumps

    FM5 Pump end only

    26082

    $3,925.00
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard 56C motor. NOT For use with gas engine. Bronze
  10. MP Pumps

    FM5 Bronze pump

    26646

    $4,612.50
    Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...
    1.5HP 230/460v Learn More
View as List Grid

Items 1-10 of 69

Set Descending Direction
per page
Page