Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.

MP Pumps

High Head Bronze pump & Motor

36194

$10,905.58
High Head Pedestal Bronze pump.

Self priming high head centrifugal pump, motor drive on ship or boat.HHL-FLOMAX “HR” high pressure
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 140 GPM
- PRESSURES - TO...
HHLF 7.5-3 184TC TEFC 6.7imp Learn More

Add to Wish List Add to Compare
Myers Pumps

Frame Mtd. 2 Stage w/ motor

I2CIB-7M

$9,320.00

Myers I2C, I2CI and I2CB Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head / pressure (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (...

7.5HP ODP 230/460v Learn More

Add to Wish List Add to Compare
Myers Pumps

Frame Mtd. 2 Stage w/ motor

I2CB-7M

$9,320.00

Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

Learn More

Add to Wish List Add to Compare
Myers Pumps

Frame Mtd. 2 Stage w/ motor

I2CIB-7MT

$10,880.00

Myers I2C, I2CI and I2CB Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head / pressure water pumps (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bro...

7.5HP TEFC 230/460v Learn More

Add to Wish List Add to Compare
AMT Pumps

Trash Pedestal Pump 3"

3100-99

$2,629.69

Trash pump on Pedestal,

pumps are designed for direct or belt drive. Frame mounted solids handling pump 3". Specific units are available in Cast Aluminum with Cast Iron impeller construction material. Easy cleanout design by removing casing bolts...

3" Pedestal Trash pump Learn More

Add to Wish List Add to Compare