Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
EBARA Pumps
Stainless Steel Jet Pump 1hp
JEU80610T1C
$1,418.34EBARA Pro Steel JEU Jet Pump NSF series is designed for dependable performance and rugged continuous duty service. When duty requirements demand material conformance for corrosion resistance, Pro Steel is the choice. This versatile and reliable pu...
1HP 115/208-230V TEFC Learn More -
Wayne
Shallow Well Jet Pump
SWS100
$416.70Shallow well jet pumps are designed to pump water from 0-25 ft. lifts. Self-priming after the pump housing is initially filled with water and a foot valve installed.- High efficiency square flange motor is thermally protected to prevent ove...
-
Wayne
Shallow Well Jet Pump
SWS50
$357.46Features & Benefits
- High efficiency square flange motor is thermally protected to prevent overheating and universally available if replacement is ever required
- Pressure switch pre-set at 30-50psi for automatic operation when used with water...
sws Learn More