My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

10 Items

Set Descending Direction
per page
  1. Sta-Rite

    1 hp Well Jet pump

    PNE-10

    $1,268.00

    1HP well jet pump

    FRP (Polypro) engineering plastic pump is corrosion and abrasion resistant. Built in jet is corrosion resistant Noryl nozzle and venturi. UL/CSA listed A.O. Smith motor with thermal overload. 1HP. Pressure switch set a 30-50 psi...

  2. Sta-Rite

    1 1/2 HP Sprinkler Pump

    BPDH15

    $1,497.00

    Quick priming PD2HF Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor

    • 1-phase, ...
    1.5HP Learn More
  3. Sta-Rite

    Shallow well Pump 1/2HP

    FNC-L

    $1,018.00

    Cast Iron shallow well jet pump water pump. 1/2 HP electric motor.

    Also often used as a sprinkler pump with built in automatic on / off using included pressure switch.

    * Superior performance at depths to water of 25' or less. * Rugged, heavy-dut...

    115/230v 1/2hp Learn More
  4. Sta-Rite

    1hp jet pump

    HMSE-1FL

    $2,568.00
    FEATURES

    Automatic Pressure Regulator –Faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells. See or...

    115/230v Learn More
  5. Sta-Rite

    1 1/2hp jet pump

    HMSF-1FL

    $3,167.00
    Sta-rite water pump. Sprinkler Irrigation pump or water well pump. FEATURES

    Automatic Pressure Regulator –Faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assur...

    115/230v Convertable Learn More
  6. Sta-Rite

    3/4hp jet pump

    HMSD-1FL

    $2,195.00
    FEATURES

    2 Stage Automatic Pressure Regulator –Faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells...

    3/4hp Convertable 2 stage Learn More
  7. Sta-Rite

    CI Shallow well Pump 3/4

    FND (7FN)

    $743.51

    Cast Iron shallow well jet pump. 3/4 HP. Often also used on commercial vessels like tug boats for showers / kitchen grey water.

    • Superior performance at depths to water of 25' or less.
    • Rugged, heavy-duty cast iron pump housing.
    • Ready-to-instal...
    Cast Iron shallow well jet pump. 3/4 HP Learn More
  8. Sta-Rite

    Shallow Jet pump

    PND-10

    $1,164.00

    Shallow well jet pump 3/4HP

    FRP (Polypro) engineering plastic pump is corrosion and abrasion resistant. Built in jet is corrosion resistant Noryl nozzle and venturi. UL/CSA listed A.O. Smith motor with thermal overload. 3/4HP. Pressure switch set...

    3/4HP 115V Learn More
  9. Sta-Rite

    1/2HP Shallow Jet pump

    PNC-10

    $1,075.00

    1/2HP Shallow Jet pump, water well / sprinkler

    FRP (Polypro) engineering plastic pump is corrosion and abrasion resistant. Built in jet is corrosion resistant Noryl nozzle and venturi. UL/CSA listed A.O. Smith motor with thermal overload. 1/2HP. ...

    1/2HP 115v Learn More
  10. Sta-Rite

    Shallow Well pump system

    FNCP42-02

    $1,425.69
    Shallow water well pump system.
    • Quality Construction - Close-grained cast iron body and base, specially treated for corrosion resistance. Drain port provided for easy winterizing.
    • Precision Molded Diffuser - Pump primes faster, handles more ...
    1/2hp 1phase Pro Source Water system Learn More
View as List Grid

10 Items

Set Descending Direction
per page