Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 30 w/ motor
24481
$1,160.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
25457
$1,320.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
MP Centrifugal pump
22731
$1,020.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
American made cast iron transfer p...
3/4HP 230/460v TEFC Learn More -
MP Pumps
Series 30 w/ motor
22839
$1,030.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HHT TEFC
$7,726.00Cast Iron Self Priming Griswold pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v TEFC Learn More -
Griswold Pumps
Irrigation pump
10HHT TEFC
$8,328.00Irrigation pump is a heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. These irrigation pumps are self priming.10HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 15HP
15HHT TEFC
$9,424.00Self-priming high flow & high-head pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
15HP 230/460v Learn More -
Griswold Pumps
CI SP pump 20HP
20HHT TEFC
$9,735.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.20HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT ODP
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v/3 Learn More