Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Griswold Pumps
Irrigation pump
10HHT TEFC
$8,328.00Irrigation pump is a heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. These irrigation pumps are self priming.10HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 15HP
15HHT TEFC
$9,424.00Self-priming high flow & high-head pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
15HP 230/460v Learn More -
Griswold Pumps
CI SP pump 20HP
20HHT TEFC
$9,735.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.20HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT ODP
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v/3 Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT TEFC
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v Learn More -
Griswold Pumps
High Pressure pump CI SP 10HP
10HLT ODP
$8,014.90High Pressure pumps. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. High pressure pumps are used for irrigation, sprinkler, spraying and fire protection.10HP 230/460v Learn More -
Griswold Pumps
Irrigation Pump
75JMT ODP
$5,315.55Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily be re-adjusted aft... -
Griswold Pumps
Irrigation Pump
15JMT
$6,342.50Irrigation pump. Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily b... -
MP Pumps
FM5 Bronze pump
26646
$3,690.00Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...1.5HP 230/460v Learn More -
MP Pumps
FM5 Flomax Pump Explosion Proof motor
22872-1
$3,330.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Explosion Proof Electric Motor Driven Cast Iron Pump using a Long-Coupled Cast Iron EXP Motor-3 HP 60HZ, 2HP 50HZ.
List of all the EXPlosion Proof Pumps, all fitted with Hazardous duty motors....
3Hp 230/460v EXP CI Learn More