Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 60 w/ motor
27671
$1,850.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1.5 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotat... -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI. -
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
26542
$1,430.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
22771
$1,200.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
25434
$690.80Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
AMT Pumps
3" CI Self-Prime Pump
2877-95
23% Off Special Price $1,812.58 Regular Price $2,354.00AMT / Gorman Rupp self-priming solids handling pumps are designed for a broad range of high capacity applications. Semi-trash pump made for demanding industrial applications, job site dewatering or pond transfer. The Centerline discharge is speci...3HP 230v/1 water pump Learn More -
Griswold Pumps
Irrigation pump 7.5HP
75HHS TEFC
$9,424.00Irrigation pump, Heavy duty work horse. Griswold HH sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. Self priming single phase 230v 7.5HP provides high flow water transfer.7-1/2HP 230v/1 TEFC 3" Learn More -
Griswold Pumps
High Pressure pump CI SP 10HP
10HHS TEFC
$9,582.0010hp 230v High Pressure water pump.
Griswold H Series Self-Priming Centrifugal Pumps. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. High pressure pumps are used for ir...
10HP 230v/1 TEFC 4" Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLS TEFC
$8,230.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/1 Learn More