My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 133

Set Descending Direction
per page
Page
  1. AMT Pumps

    Solids Handling Electric Pump CI Centrifugal

    276D-95

    $1,272.88
    Solids Handling Electric Pump Self-priming pump is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These 2" pumps feature self-cleaning clog resistant impeller capa...
    2HP 230/460v TEFC Learn More
  2. Sta-Rite

    J Centrifugal Pump High Head 2-1/2HP

    JHHG-53HL

    $2,432.00
    This pump has a heavy-duty cast iron construction with Noryl impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear ring an...
    115/230v Learn More
  3. Sta-Rite

    JB Centrifugal Pump High Head 2-1/2HP

    JBHHG-53S

    $2,634.00
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear rin...
  4. Sta-Rite

    JB Centrifugal Pump High Head 2-1/2HP

    JBHHG3-53S

    $3,200.00
    This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for ea...
  5. Pacer Pumps

    Centrifugal Pump

    SE2HL-D3.0C

    $1,599.00

    Pacer S pump 58-12H4 D3.0C close coupled to a TEFC 3hp motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlori...

    3HP 230/460v EPDM Learn More
  6. AMT Pumps

    Thermoplastic pump kit

    382A-K9

    $366.56
    AMT Plastic General Purpose pumps Kit. The various models are designed to cover a wide array of applications including Ag, fertilizer, lawn care, dewatering, irrigation, solids handling, etc. All units are portable. Pumps are designed for use w...
    Pump Kit Learn More
  7. AMT Pumps

    Gas Engine Dredge Pump

    316F-95

    $2,229.13
    Dredge Pump

    Gas Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving,...

    Honda GX160 OHV w/ Oil Alert Learn More
  8. MP Pumps

    2CT-3HS Trash Pump PEO

    43928

    $3,600.00

    2CT Jaeger Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled 184TC motor 3450rpm. This unit has cast iron constru...

    For electric Learn More
  9. MP Pumps

    2CT Trash Pump PEO

    43931

    $3,250.00
    2CT Jaeger MP Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled. This unit has cast iron construction with a du...

  10. MP Pumps

    FM 8 w/ Engine

    21323

    $1,358.50
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 3.5 HP B&S. These heavy duty dewatering and transfer pumps are constructed of all cast iron. Used by farmers, contractors and others wanting a dependable centrifugal pump whi...
    3.5HP Briggs Cast Iron Learn More
View as List Grid

Items 1-10 of 133

Set Descending Direction
per page
Page