Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 60 w/ motor
27671
$1,850.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1.5 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotat... -
AMT Pumps
Self Priming Centrifugal Pump
285H-95
20% Off Special Price $752.00 Regular Price $940.001.5HP AMT Self-priming Cast Iron pump 285H-95
Heavy duty cast iron construction designed for circulating, boosting, washdown, liquid transfer and dewatering applications. The centerline discharge feature is specifically designed to prevent vapor ...
1.5HP 115/230v TEFC Learn More