Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pacer Pumps
60-12C4 C2.0C
PCE2CL-C2.0C
$873.00PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvents, an...
-
Hypro Pumps
Corrosion Resistant PolyPro Pump
CHMPB34T
$1,014.87Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r... -
Hypro Pumps
PTO Drive Polypro pump
9008P-OB
$1,081.98PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal. -
Hypro Pumps
PTO Drive Polypro pump
9018P-O
$1,355.09PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. -
Hypro Pumps
PTO Drive Polypro pump
9018P-OB
$1,355.09PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal. -
Hypro Pumps
PTO Drive Polypro pump
9028C-O
$1,270.61Cast iron pump with oil lubricated grear drive and 1 3/5" 1000rpm female PTO hub with locking collar and mounting clip. Clip pumps to PTO sheild of most tractors. -
Hypro Pumps
PTO Drive Polypro pump
9006C-O
$1,265.98Cast iron pump with oil lubricated grear drive and 1 3/8" 540 rpm female PTO hub with locking collar and mounting clip. Clips pump to PTO sheild of most tractors. -
Hypro Pumps
PTO Drive Polypro pump
9008C-O
$1,265.98Cast iron pump with oil lubricated grear drive and 1 3/8" 1000 rpm female PTO hub with locking collar and mounting clip. Clips pump to PTO sheild of most tractors. -
Hypro Pumps
Corrosion Resistant Noryl pump
CHMNA243T
$1,038.01Corrosion Resitant Noryl Centrifugal pumps. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and wastetreatment. All pumps include a 1/4" NPT drain plug.
Pumps include a unique water flush port and plug for flushing the mec...
1Hp 230/460 TEFC Learn More -
Hypro Pumps
Corrosion Resistant Noryl Pump
CHMNA2X
$759.35PUMP END ONLY. Corrosion Resistant Noryl Centrifugal pumps. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent recovery, circulation of purified wa...PEO Learn More