Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pacer Pumps
SE2PL-E550
P-58-12P4 E550
$557.00Pacer Pump Self-Priming, salt brine. Centrifugal Horizontal Mechanical Sealed Pump (Self-Priming) Pacer series with gasoline engine. Great pump for removing water from basements, ditches, swimming pools or anywhere a large volume of water needs...4HP 2" Learn More -
Pacer Pumps
SE1 1/2PL E550
P-58-11Y4 E550
$557.00Centrifugal Horizontal Mechanical Sealed Pump Self-Priming Pacer pump series with gasoline engine. Great pump mild chemicals like sodium hypochloride for cleaning roofs. Also good for Deicing irrigation, fish farms, herbicide, ag, de-icer fluid...5.5 Gas engine Learn More