My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 51

Set Descending Direction
per page
Page
  1. Hypro CHMSV573T High Head SS Pump

    Hypro Pumps

    High Head 316SS Pump

    CHMSV573T
    $6,649.24

    316 Stainless Steel High Head Centrifugal Pumps by Shurflo Hypro.

    316SS pump designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate r...

    3HP,3ph TEFC Learn More
    Add to Wish List Add to Compare
  2. Hypro CHPPB6 PP Pedestal Pump

    Hypro Pumps

    PP Pedestal Pump

    CHPPB6
    $1,075.63
    Corrosion Resistant Polypropylene Centrifugal pumps. Mounted on a CI bearing pedestal for belt pulley or customer motor drive. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical ...
    chpp Learn More
    Add to Wish List Add to Compare
  3. Hypro COMSV343T 316Stainless Steel pump 1HP

    Hypro Pumps

    316Stainless Steel pump 1HP

    COMSV343T
    $2,143.20

    1HP 316 Stainless Steel investment cast end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer. 

    This series of low pressure general transfer pumps are also available in C...

    230/460v/3 TEFC Learn More
    Add to Wish List Add to Compare
  4. Hypro CHMSV673 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMSV673
    $3,216.80
    316 Stainless Steel High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications...

    SS,3HP,3ph Learn More
    Add to Wish List Add to Compare
  5. Hypro CHMSV35T High Head Pump

    Hypro Pumps

    High Head Pump

    CHMSV35T
    $6,204.92
    Stainless Steel High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, f...

    SS 1.5HP/TEFC Learn More
    Add to Wish List Add to Compare
  6. Hypro CHMSV353T High Head SS Pump

    Hypro Pumps

    High Head SS Pump

    CHMSV353T
    $4,839.29

    316 Stainless Steel High Head Centrifugal Pumps by Shurflo Hypro.

    316SS pump designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate r...

    1.5HP,3ph TEFC Learn More
    Add to Wish List Add to Compare
  7. Hypro CHMPB34T Corrosion Resistant PolyPro Pump

    Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPB34T
    $3,341.77
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
    Learn More
    Add to Wish List Add to Compare
  8. Hypro CHMSV56 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMSV56
    $4,294.38
    316SS High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, ...

    Learn More
    Add to Wish List Add to Compare
  9. Hypro COMSV22 316SS pump .5HP

    Hypro Pumps

    316SS pump .5HP

    COMSV22
    $2,180.86

    316 SS investment cast end-suction centrifugal pump. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available as a option...

    1/2HP 115/230v Learn More
    Add to Wish List Add to Compare
  10. Jockey Pump

    Hypro Pumps

    Jockey Pump

    CSMSV8X
    $3,204.59
    SHURflo self-priming close-coupled cast iron, bronze or 316 stainless steel pumps produce high flow rates under low headconditions. Designed for continuous low pressure circulation and transfer of non-flammable liquids, water circulation,irrigati...
    Pump End Only Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 51

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Chemical Pumps Remove This Item
  2. Manufacturer Hypro Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 18 items
  2. Three (3) 24 items
Voltage (Range)
  1. 220-240/460-480 2 items
  2. 110-120/220-240 18 items
  3. 208-240/460 22 items
Horse Power (HP)
  1. 1/3 1 item
  2. 1/2 7 items
  3. 3/4 6 items
  4. 1 9 items
  5. 1 1/2 6 items
  6. 2 9 items
  7. 3 4 items
inlet size
  1. 1 ¼" 10 items
  2. 1 ½" 36 items
  3. 2in 2 items
PRICE $
$  -  $
Motor
  1. ODP 11 items
  2. PTO 1 item
  3. TEFC 31 items