Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS Pump & Motor
C14315B1T1-1-WG
$1,506.55SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. All pump parts including the base are 304 SS. The internal design also prevents any air from being trapped in the pump case when ...1HP 115/230V TEFC Learn More -
MP Pumps
FM5 Pump w/ 1.5HP
26549
$1,760.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...
1.5HP 115/230v CI Learn More -
MP Pumps
FM5 Pump w/2HP Motor
26550
$2,070.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26553
$1,660.00FM8 pump cast iron. Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 1.5 HP1.5HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
Series 60 w/ motor
27674
$1,750.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotatio...1HP 115/230v Learn More -
MP Pumps
Series 60 w/ motor
27671
$1,850.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1.5 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotat... -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI. -
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
26542
$1,430.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.