My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 75

Set Descending Direction
per page
Page
  1. AMT Pumps

    3 Self-Priming Stainless Steel pump

    6200-98

    $8,500.00

    Self-Priming Stainless Steel pump.

    3" SS self priming electric motor pump. A robust Stainless Steel SS Centrifugal self priming pump designed for a broad range of high capacity applications, including dewatering, waste pits, liquid transfer, circ...

    5HP 230v/1 Learn More
  2. AMT Pumps

    3 Self-Priming Stainless Steel pump

    6202-98

    $6,882.88

    Self-Priming Stainless Steel pump.

    3" SS self priming electric motor pump. A robust Stainless Steel SS Centrifugal self priming pump designed for a broad range of high capacity applications, including dewatering, waste pits, liquid transfer, circ...

    7.5HP 230v/460 Learn More
  3. AMT Pumps

    3" CI Self-Prime pump

    2875-95

    $2,459.69
    AMT self-priming pumps are designed for a broad range of high capacity applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections.

    Self-cleaning semi-open stainless...

    5HP 230/460v Learn More
  4. AMT Pumps

    3" Solids Handling Self-Prime Pump

    2874-95

    $2,149.44
    Self priming Solids Handling self-priming pumps are designed for a broad range of high capacity applications. The Center-line discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections.

    Self-cl...

    3HP 230/460v Learn More
  5. AMT Pumps

    Trash Pump 3" Kit

    3S5X

    $971.39

    Trash Pump 3" kit.

    3" Aluminum trash pump with cast iron impeller and wearplate in kit form for customer mounting to gas engine with 5/8"-16 threaded shaft. FKM seals for AG chemicals. Picture shows the Pedestal mounted model for ref. only. Made ...

    Pump Kit 5/8" shaft Learn More
  6. MP Pumps

    Series 300

    26812

    $7,737.50
    Enclosed impellers are dynamically balanced to improve efficiency and bearing life. Standard carbon / ceramic / FKM mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
  7. Webtrol

    HT Booster Pump

    H60B31S-3PH

    $26,235.00
    The Webtrol Ht Series is the original Heavy Duty Booster Pump, designed for high flow at high head. The HT Series Booster Pumps are built to withstand the rigorous demands generated through use in the Reverse Osmosis, Deionization, Car Wash, Wash...
    30HP 208-230/460V ODP Learn More
  8. Webtrol

    HT Booster Pump

    H60B34S-3PH

    $26,740.80
    The Webtrol Ht Series is the original Heavy Duty Booster Pump, designed for high flow at high head. The HT Series Booster Pumps are built to withstand the rigorous demands generated through use in the Reverse Osmosis, Deionization, Car Wash, Wash...
    30HP 208-230/460V ODP Learn More
  9. MP Pumps

    FM30 Pump w/ no engine

    33212

    $4,337.50
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.
    6.75" impeller Learn More
  10. MP Pumps

    FM30 Pump w/ 18HP Engine

    39143

    $10,350.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

View as List Grid

Items 1-10 of 75

Set Descending Direction
per page
Page