Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM40 Engine Mount Pump
33354
$8,300.00Flomax 40 are self-priming pumps, pipe size 4" NPT. PUMPAK for Engine Drive. Used for irrigation, ship fire protection, and other water pump applications requiring high pressure and high flow. ENGINE NOT INCLUDED, use 18-50 HP.For engine drive mount CI Learn More -
Griswold Pumps
Irrigation pump 7.5HP
75HHS TEFC
$9,424.00Irrigation pump, Heavy duty work horse. Griswold HH sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. Self priming single phase 230v 7.5HP provides high flow water transfer.7-1/2HP 230v/1 TEFC 3" Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HHT TEFC
$7,726.00Cast Iron Self Priming Griswold pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v TEFC Learn More -
Griswold Pumps
Irrigation pump
10HHT TEFC
$8,328.00Irrigation pump is a heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. These irrigation pumps are self priming.10HP 230/460v TEFC 4" Learn More -
Griswold Pumps
CI SP pump 15HP
15HHT TEFC
$9,424.00Self-priming high flow & high-head pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
15HP 230/460v Learn More -
Griswold Pumps
CI SP pump 20HP
20HHT TEFC
$9,735.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.20HP 230/460v TEFC 4" Learn More -
MP Pumps
FM40 Pedestal Pump
33684
$8,210.00Flomax 40 are self-priming pumps, pipe size 4" NPT. Pedestal pump with FKM seal, grease lube bearings, 1 1/8" shaft. For Belt of direct drive. Often used for ship ballast, marine, fuel depots. See performance curve under IMAGE tab for speed vs ...4" cast iron Learn More -
Griswold Pumps
Irrigation pump
10HHT
$8,328.00Griswold H Series Irrigation Self-Priming Pumps
Irrigation Pump. High pressure irrigation pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
H Series pumps are a un...
10HP 230/460v ODP Learn More -
Griswold Pumps
Irrigation pump
15HHT ODP
$9,424.00Irrigation pump, Self-priming high flow & high head high pressure pump. Three phase, 15 hp, 230/460vac,Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free high pressure irrigation pump serv...
15HP 230/460v ODP Learn More -
Munro Pumps
CI self prime pump 10HP
MU10MT
$8,190.00Self-priming high-head & high flow pump. Three phase, 10 hp, 230/460vac,
Heavy duty work horse. Sturdy cast iron design engineered for years of trouble free irrigation service. MU1OMT
Self-priming high-head & high flow pump. Three phase, 10 hp, 230/460vac, Learn More