Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
EBARA Pumps
Stainless Steel Centrifugal Pump
ACDU120/110T3G
$1,153.17The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-...1HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 1 hp motor.
S14320B1T3
$700.49Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1HP 230/460V TEFC Learn More -
MP Pumps
Series 60 w/ motor
27675
$1,700.00MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...1HP 230/460v TEFC Learn More -
MP Pumps
Series 30 w/ motor
22839
$1,030.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
AMT Pumps
SS Centrifugal
282K-98
23% Off Special Price $1,458.38 Regular Price $1,894.00This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of...
230/460v 1HP TEFC Learn More -
AMT Pumps
Self Priming Centrifugal Pump 1HP
285J-95
20% Off Special Price $692.80 Regular Price $866.001 HP Self-priming cast iron pump for clean or dirty water circulating, liquid transfer, coolant and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. For a 12v model see -12 version...
1HP 230/460v/3 TEFC Learn More -
American Stainless
SS horizontal pump 1725
S24362B1TC
$763.83Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1HP 230/460V TEFC Learn More -
American Stainless
SS pump & motor
C14616B1T3-F
$1,129.79Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pum...1HP 230/460V TEFC Learn More -
American Stainless
SS Pump & Motor
C14315B1T3
$928.00ASP 304SS SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. All pump parts including the base are 304 SS. The internal design also prevents any air from being trapped in the pum...1HP 230/460V TEFC Learn More