Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
26542
$1,430.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
22771
$1,200.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
25434
$690.80Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 80 w/ motor
26540
$2,150.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 1-phase, 115/230 V, 3450 RPM. -
AMT Pumps
Irrigation pump
379B-95
20% Off Special Price $816.00 Regular Price $1,020.001.5HP Irrigation pump feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All irrigation pump models self-prime to 20 feet. Single stage irrigation pump models feature a ...
1-1/2HP 115/230v TEFC Learn More -
Berkeley Pumps
B1-1/2TPL Berkeley Water Pump
B54494
Berkeley pump. End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Use Berkeley pump on your chiller, water booster pump, fish hatchery, building fire sprinkler s...5HP 1phase Learn More -
MP Pumps
Stainless Steel FM 8 w/ 2HP Motor
33818
$4,140.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled SS -
Sta-Rite
2.5HP Sprinkler Pump
DMMG-42L
Sta-rite Medium Head Self-priming centrifugal pump for sprinkler irrigation, fire protection, marine and liquid transfer. Cast iron construction with Bronze enclosed impeller. Includes drain port. Order suction port separately as a accessory.115/230v Learn More -
AMT Pumps
Self Priming CI Pump
2SP30C-1P
20% Off Special Price $1,028.00 Regular Price $1,285.003HP CI Self-priming pump.
Heavy duty American made pump for circulating, liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liq...
3HP 1 phase Learn More