Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 3/4HP
JMD-57L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
115/230 Learn More -
Sta-Rite
JB Centrifugal Pump High Head 3/4HP
JBHD-62S
Sta-Rite - JBHD: JB Centrifugal Pump High Head 3/4HP brass impeller. This pump has a heavy-duty cast iron construction with silicon bronze impeller. Replace Myers CT07B- Applications: Water systems and sprinkling for homes, farms and industry ...
3/4HP 115/230v Brass impeller Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC-56S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
MP Pumps
FM5 Pump w/ 1.5HP
26549
$1,760.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...
1.5HP 115/230v CI Learn More -
MP Pumps
FM5 Pump w/2HP Motor
26550
$2,070.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26553
$1,660.00FM8 pump cast iron. Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 1.5 HP1.5HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
Series 60 w/ motor
27674
$1,750.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotatio...1HP 115/230v Learn More -
MP Pumps
Series 60 w/ motor
27671
$1,850.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1.5 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotat... -
MP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI.