Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B2ZPLS Centrifugal Water Pump 20hp
B74492
BERKELEY Close-Coupled high head Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without distur...230/460v/3 20HP 2-1/2"x2" Flange Learn More -
Berkeley Pumps
B2-1/2ZPMS Centrifugal Water Pump
B74632
End suction centrifugal pump, close coupled 7.5HP 3ph ODP electric motor. Berkeley pump with mechanical seal. Silicon Bronze impeller7.5hp-3ph Learn More -
Berkeley Pumps
B2-1/2ZPLS Centrifugal Water Pump
B54092
B2-1/2ZPLS Centrifugal Water Pump by Berkeley
End suction centrifugal pump, close coupled to a electric motor 20hp with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy m...
20HP 230/460v/3 Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
4901-95
$1,008.00High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...208-230/460v 3HP ODP Learn More -
Berkeley Pumps
B2-1/2TPMS Berkeley Water Pump
B75980
Berkley centrifugal pump, End suction centrifugal pump, close coupled with mechanical seal and Flanged connections. Used for irrigation, fire sprinkler, boosting and general commercial water applications. 125# flat face flanges.BERKELEY Close...
10HP 3 phase ODP Learn More -
Berkeley Pumps
Centrifugal Water Pump
B54094
Berkeley B54094 Centrifugal water pump
End suction centrifugal pump, close coupled 30hp motor with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy maintenance and modera...
460v B2-1/2ZPLS Learn More -
Berkeley Pumps
B2-1/2ZPLS Centrifugal Water Pump
B66542S
End suction centrifugal pump, close coupled with mechanical seal.30HP 230/460v/3 Learn More -
Berkeley Pumps
B1WP Centrifugal Water Pump
B55569S
Berkeley water pump. End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Packed pump.5HP 3600/60/3 ODP SILICON BRONZE Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54605
7.5HP Berkeley End suction centrifugal water pump,
close coupled with mechanical seal. Used for irrigation, fountains, spa, pools and other water transfer applications.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications req...
230/460 7-1/2HP Learn More -
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54606
10HP End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains, spa, pools, commercial dishwashers lvo and other water transfer applications.230/460 10HP Learn More