Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B3TPMS Centrifugal Water Pump 7.5HP/3ph
B74757
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool, commercial dishwasher lvo and other water transfer applications.7.5hp Learn More -
Berkeley Pumps
Centrifugal Water Pump
B58088
End suction centrifugal pump, close coupled with mechanical seal.10HP 230/460V ODP Learn More -
Berkeley Pumps
Centrifugal Water Pump
B58127
Berkley centrifugal pump, close coupled to a 60 HP electric motor. Use for irrigation, water features, water falls. Bronze fitted impeller. ANSI 125# flat face flanges.60HP 3ph 230/460V Learn More -
Berkeley Pumps
Centrifugal Water Pump
B85704
Berkley centrifugal pump, close coupled to a 40 HP electric motor. Use for irrigation, water features, water falls. Bronze fitted impeller. ANSI 125# flat face flanges.B6ZPBHHS Learn More -
Berkeley Pumps
B2TPM Centrifugal Water Pump
B55576
End suction centrifugal pump 10HP single phase, close coupled with packing. Water pump for irrigation, water transfer, industrial applications.
10HP 230v/1 Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1-1/2HP
JMF-40L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
115/230v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 1-1/2HP
JBHF-51S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
Sta-Rite
CC Centrifugal Pump
CCHJ
Sta-rite Centrifugal Pump CCHJ, high head. This pump is compact, but rugged. With optional basket strainer often used as a commercial pool pump.
- Applications: Irrigation, water systems, sprinkling for homes, farms and industry
- Base: Heavy gaug...
-
Sta-Rite
CC Centrifugal Pump
CCHM3
This pump is compact, but rugged. With optional basket strainer often used as a commercial pool pump.- Applications: water systems, sprinkling for homes, farms and industry
- Base: Heavy gauge steel
- Impeller:
- silicon brass (non-leaded)
- dyn...
-
Sta-Rite
CC Centrifugal Pump
CCMH
This pump is compact, but rugged. With optional basket strainer often used as a commercial pool pump.- Applications: water systems, sprinkling for homes, farms and industry
- Base: Heavy gauge steel
- Impeller:
- silicon brass (non-leaded)
- dynamically...
