My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 14

Set Descending Direction
per page
Page
  1. Cast Iron Centrifugal Pedestal Pump

    Hypro Pumps

    Cast Iron Centrifugal Pedestal Pump

    9202C
    $1,747.20
    • Planetary oil bath gear drive
    • Pedestal mount, direct drive
    • Max. pressure: 170 psi
    • Max. speed: 6000 rpm
    • Shaft: 5/8" solid
    • Port sizes:
      • 9202C 1-1/4" NPT inlet, 1" NPT outlet
    • Max. fluid temperature: 140ｺF
    • Housing: cast iron
    • Impeller: glass-fill...
    Learn More
    Add to Wish List Add to Compare
  2. Cast Iron Centrifugal Pedestal Pump

    Hypro Pumps

    Cast Iron Centrifugal Pedestal Pump

    9203C
    $1,772.40
    • Planetary oil bath gear drive
    • Pedestal mount, direct drive
    • Max. pressure: 170 psi
    • Max. speed: 6000 rpm
    • Shaft: 5/8" solid
    • Port sizes:
      • 9203C 1-1/2" NPT inlet, 1-1/4" NPT outlet
    • Max. fluid temperature: 140ｺF
    • Housing: cast iron
    • Impeller: glass-...
    Learn More
    Add to Wish List Add to Compare
  3. Cast Iron Centrifugal Pedestal Pump

    Hypro Pumps

    Cast Iron Centrifugal Pedestal Pump

    9203C-R
    $1,798.80
    • Planetary oil bath gear drive
    • Pedestal mount, direct drive
    • Max. pressure: 170 psi
    • Max. speed: 6000 rpm
    • Shaft: 5/8" solid
    • Port sizes:
      • 9203C-R 1-1/2" NPT inlet, 1-1/4" NPT outlet
    • Max. fluid temperature: 140ｺF
    • Housing: cast iron
    • Impeller: glas...
    Learn More
    Add to Wish List Add to Compare
  4. Hypro CHMCV673 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV673
    $1,260.02
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountai...

    230/460V 3HP ODP Learn More
    Add to Wish List Add to Compare
  5. Shertech Hypro - CHMCV35T: High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV35T-1
    $2,743.54

    1.5hp Cast Iron High Head Centrifugal Pump.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fount...

    115/230v 1-1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  6. Shertech Hypro - CHMCV35T: High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV35T
    $4,758.10

    1.5hp Cast Iron High Head Centrifugal Pump.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fount...

    115/230v 1-1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  7. Hypro CHMCV3X High Head Pump PEO

    Hypro Pumps

    High Head Pump PEO

    CHMCV3X
    $2,851.56
    High Head Pump PEO. Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, car wash, general transfer, filtration, cooling towers, condensate return, m...

    Pump End Only Cast Iron Learn More
    Add to Wish List Add to Compare
  8. Hypro CHMCV34 High Head Pump

    Hypro Pumps

    High Head Pump

    CHMCV34
    $3,562.74

    High Head Pump and motor. Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, car wash, general transfer, filtration, cooling towers, condensate ret...

    1HP 115/230v Cast Iron Learn More
    Add to Wish List Add to Compare
  9. High Head Pump Cast Iron

    Hypro Pumps

    High Head Pump Cast Iron

    CHMCV123
    $1,992.86
    High Head Pump and motor. Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, car wash, general transfer, filtration, cooling towers, condensate ret...

    1/2HP 230/460v ODP Learn More
    Add to Wish List Add to Compare
  10. Hypro CHMCV67 High Head Pump Centrifugal

    Hypro Pumps

    High Head Pump Centrifugal

    CHMCV67
    $3,600.86
    Cast Iron High Head Centrifugal Pumps.

    Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains,...

    3HP 230/1 Cast Iron Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 14

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Cast Iron Pumps Remove This Item
  2. Manufacturer Hypro Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 5 items
  2. Three (3) 5 items
Voltage (Range)
  1. 220-240/460-480 1 item
  2. 110-120/220-240 4 items
  3. 220-240 1 item
  4. 208-240/460 4 items
Horse Power (HP)
  1. 1/2 1 item
  2. 1 1 item
  3. 1 1/2 4 items
  4. 2 2 items
  5. 3 2 items
inlet size
  1. 1 ¼" 7 items
  2. 1 ½" 6 items
PRICE $
$  -  $
Motor
  1. ODP 6 items
  2. TEFC 4 items