My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 105

Set Descending Direction
per page
Page
  1. MP 35221 FM5 Pump w/ 1.5HP

    MP Pumps

    FM5 Pump 1.5HP 3P

    35221
    $1,847.00

    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...

    1.5HP 230/460v CI Learn More
    Add to Wish List Add to Compare
  2. MP 36301 High Head Pump Motor HHLF uscg fire

    MP Pumps

    High Head Pump & Motor HHLF

    36301
    $3,570.00

    Self priming high head centrifugal pump, close coupled to an electric motor.

    • 1 1/2 x 1 1/2" HIGH HEAD
    • ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
    7.5HP 230/460v USCG Learn More
    Add to Wish List Add to Compare
  3. Cement Truck Pump w/Hydraulic Motor MP 36589

    MP Pumps

    Cement Truck Pump w/Hydraulic Motor

    36589
    $1,940.00

    Cement Truck Pump w/Hydraulic Motor. Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Pedistal mounted Hydraulic motor .37 disp 5.9HD. Pumps are right hand rotation. Also used on water trucks...

    Water Pump Learn More
    Add to Wish List Add to Compare
  4. MP - 22872 EXP: FM5 Flomax Pump Explosion Proof motor

    MP Pumps

    FM5 Flomax Pump Explosion Proof motor

    22872-1
    $3,330.00

    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Explosion Proof Electric Motor Driven Cast Iron Pump using a Long-Coupled Cast Iron EXP Motor-3 HP 60HZ, 2HP 50HZ. 

    List of all the EXPlosion Proof Pumps, all fitted with Hazardous duty motors....

    3Hp 230/460v EXP CI Learn More
    Add to Wish List Add to Compare
  5. MP 26538-Exp Series 80 w/ motor Ex

    MP Pumps

    Series 80 w/ motor Ex

    26538-1
    $2,599.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Explosion Proof Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.
    Explosion proof Learn More
    Add to Wish List Add to Compare
  6. MP 26646 Marine Electric pump FM5 Bronze pump

    MP Pumps

    FM5 Bronze pump

    26646
    $3,690.00
    Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  7. MP 26082 FM5 Pump end only

    MP Pumps

    FM5 Pump end only

    26082
    $3,140.00
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard 56C motor. NOT For use with gas engine. Bronze
    Learn More
    Add to Wish List Add to Compare
  8. MP 26038 Series 80 pump pak

    MP Pumps

    Series 80 pump pak

    26038
    $1,160.00
    Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Pump kit NO motor. For 145TC
    Learn More
    Add to Wish List Add to Compare
  9. MP 36085 High Head pump Pumpak HHLF electric

    MP Pumps

    High Head pump Pumpak HHLF

    36085
    $1,550.00

    Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. Auxiliary Fire Control 46 CFR Compliant US Coast Guard. ABS

    • 1 1/2 x 1 1/2" HIGH HEAD
    • For “C” FACE ELECTRIC MOTOR DRIVE 184TC
    • FLOWS - TO 140 G...
    Electric motor pump kit Learn More
    Add to Wish List Add to Compare
  10. Series 110 w/ motor

    MP Pumps

    Series 110 w/ motor

    24994
    $1,750.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3450 RPM.
    1-1/2HP 230/460v Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 105

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Cast Iron Pumps Remove This Item
  2. inlet size 1 ½" Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 44 items
  2. Three (3) 48 items
Voltage (Range)
  1. 208-240 2 items
  2. 220-240/460-480 27 items
  3. 110-120/220-240 27 items
  4. 220-240 16 items
  5. 208-240/460 20 items
Horse Power (HP)
  1. 1/2 3 items
  2. 3/4 5 items
  3. 1 14 items
  4. 1 1/2 20 items
  5. 2 29 items
  6. 3 20 items
  7. 5 3 items
  8. 6 1 item
  9. 7 1/2 1 item
PRICE $
$  -  $
Motor
  1. EXP (C 1, Gp C/D & C11, Gp F/G) 4 items
  2. EXP (C 1, Gp C/D) 2 items
  3. Gas Engine 2 items
  4. Hydraulic Motor 1 item
  5. ODP 55 items
  6. TEFC 33 items