Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM5 Pump 1.5HP 3P
35221
$1,847.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...
1.5HP 230/460v CI Learn More -
MP Pumps
High Head Pump & Motor HHLF
36301
$3,570.00Self priming high head centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
7.5HP 230/460v USCG Learn More -
MP Pumps
FM5 Flomax Pump Explosion Proof motor
22872-1
$3,330.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Explosion Proof Electric Motor Driven Cast Iron Pump using a Long-Coupled Cast Iron EXP Motor-3 HP 60HZ, 2HP 50HZ.
List of all the EXPlosion Proof Pumps, all fitted with Hazardous duty motors....
3Hp 230/460v EXP CI Learn More -
MP Pumps
Series 80 w/ motor Ex
26538-1
$2,599.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Explosion Proof Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.Explosion proof Learn More -
MP Pumps
FM5 Bronze pump
26646
$3,690.00Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...1.5HP 230/460v Learn More -
MP Pumps
Series 110 w/ motor
24994
$1,750.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3450 RPM.1-1/2HP 230/460v Learn More -
MP Pumps
Series 110 w/ motor
24580
$1,450.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3450 RPM. -
MP Pumps
Series 110 w/ motor
26545
$1,500.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1HP, 3450 RPM. -
MP Pumps
Series 110 w/ motor
26544
$1,480.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-.75 HP, 3450 RPM. -
MP Pumps
Series 80 w/ motor
26539
25% Off Special Price $1,763.25 Regular Price $2,351.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-3 HP, 3-phase, 230/460 V, 3450 RPM.3HP 230/460v Learn More