Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
490C-95
$938.40High Pressure Centrifugal Pump Series Page Link. High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildin...2HP 115/230v/1 TEFC Learn More -
Sta-Rite
J Centrifugal Pump High Head 2HP
JHG-52HL
Sta-Rite - JHG: J Centrifugal Pump High Head 2HP. This pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT20- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for eas...
-
Sta-Rite
J Centrifugal Pump Med Head 2HP
JMG3-41
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 2HP
JBHG-52S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
MP Pumps
FM5 Pump w/ 2HP Motor
26300
$1,850.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 230/460v Learn More -
MP Pumps
FM5 Pump w/2HP Motor
26550
$2,070.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 115/230v CI Learn More -
MP Pumps
Series 80 w/ motor
26535
$1,710.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3-phase, 230/460 V, 3450 RPM. Pumps are right hand rotation with bronze enclosed impeller. -
MP Pumps
Series 80 w/ motor
26538
$1,980.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3-phase, 230/460 V, 3450 RPM.2hp 3phase Learn More -
MP Pumps
Series 80 w/ motor
26540
$2,150.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 1-phase, 115/230 V, 3450 RPM. -
MP Pumps
Series 110 w/ motor
24580
$1,450.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3450 RPM.