Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM5 Pump
31244
$2,130.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-3 HP3HP 230/1 Learn More -
MP Pumps
FM8 w/ Motor
30935
$2,140.00FM8 Flomax 8 are self-priming pumps,
MP cast iron pump has pipe size 2" NPT. Electric Motor Driven Pump Cast Iron using a Close-Coupled Electric Motor-3 HP
3HP 230v/1 CI Learn More -
MP Pumps
FM 8 w/ 3HP Motor
22870
$3,470.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-3 HPCI 3HP 230/460v TEFC Learn More -
MP Pumps
Series 80 w/ motor
26539
$2,351.00Series 80 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-3 HP, 3-phase, 230/460 V, 3450 RPM.3HP 230/460v Learn More -
AMT Pumps
3" CI Self-Prime Pump
2877-95
$2,354.00AMT / Gorman Rupp self-priming solids handling pumps are designed for a broad range of high capacity applications. Semi-trash pump made for demanding industrial applications, job site dewatering or pond transfer. The Centerline discharge is speci...3HP 230v/1 water pump Learn More -
AMT Pumps
Self Priming Dewatering Pump
2766-95
$1,179.00AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling ...3HP 230/460v Learn More -
MP Pumps
PE8 Pump Explosion proof
35641
$4,020.00Petroleum pump PE8 by MP with Explosion Proof motor, Centrifugal Pump in ductile iron. The "PE" model is available in Pedestal mount for flexible coupling or Close Coupled mount to C Face Class I Group D Explosion Proof electric motors. Ductil...3HP EXP 230/460v Learn More -
MP Pumps
FM8 SS Self Priming Pump w/ Motor
38333
$4,170.00FM8 Flomax 8 stainless steel pumps are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 3HP.The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applicatio...3HP 230/460v SS Learn More -
Sta-Rite
Centrifugal Pump High Head
C1-1/2TPHS B59212S
$2,810.87Type C Series Straight Centrifugal The Type C Pump is a compact, horizontal, single stage, centrifugal pump close-coupled to an electric motor. The removal of readily accessible bolts (back pull-out construction), permits the removal of the pum...3HP 230v/1 Learn More -
Sta-Rite
Centrifugal Pump High Head
C2MPS B53617S
$2,605.01Type C Series Straight Centrifugal The Type C Pump is a compact, horizontal, single stage, centrifugal pump close-coupled to an electric motor. The removal of readily accessible bolts (back pull-out construction), permits the removal of the pum...3HP 230v/460v/3 Learn More