Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Griswold Pumps
Irrigation Pump
75JMT ODP
$5,315.55Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily be re-adjusted aft... -
Berkeley Pumps
B1-1/2TPMS High Pressure Water Pump
B58086
High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...7.5HP 230/460V ODP Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More -
Berkeley Pumps
B2-1/2TPMS Centrifugal Water Pump
B54572
B2-1/2TPMS Centrifugal Water Pump B54572.
Centrifugal water pump by Berkeley. Heavy duty, cast iron End suction centrifugal pump, close coupled to a electric motor with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most...
7.5HP 230/460v Learn More -
MP Pumps
2CT-3HS Trash Pump w/ motor
44193
$5,290.002CT Jaeger Trash Pumps, self-priming, cast iron. Close-coupled TEFC electric motor drive provided.
The Model 2CT is a 3" x 3" Self Priming Trash Pump which is close coupled. This unit has cast iron construction with a ductile iron impeller, 304 s...
3" 7.5HP 230/460v TEFC Learn More -
MP Pumps
High Head Pump & Motor HHLF
36301
$3,570.00Self priming high head centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
7.5HP 230/460v USCG Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Single Phase - CI)
B54499
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9""
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
7.5hp 230v/1 Sealed Learn More -
AMT Pumps
3" Self-Prime Explosion Proof Pump
2876-X5
$5,620.003" Self-Prime Explosion Proof Pump.
Self-priming pumps are designed for a broad range of high capacity applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections.
Li...
7.5HP 230/460v EXP Learn More -
Berkeley Pumps
B5WPS Water Pump
B62580
Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Silicon Bronze impeller. Obsolete due to DOE new efficiency standards.7.5HP 3ph OBS Learn More -
MP Pumps
FloMax 10 Pump w/ Motor
22779
$5,560.00Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP 230 1phase Learn More
